Mini COOPER SE, Руководство пользователя

Страница: 123 / 286

Follow the information in the Check Control
message.
The indicator light flashes and is then illu-
minated continuously: flat tires or tire pres-
sure losses cannot be detected.
– Interference caused by systems or devi-
ces with the same radio frequency: after
leaving the area of the interference, the
system automatically becomes active
again.
– TPM was unable to complete the reset.
Reset the system again.
– A wheel without TPM wheel electronics
is mounted: have it checked by a deal-
er’s service center or another qualified
service center or repair shop as needed.
– Malfunction: have the system checked
by a dealer’s service center or another
qualified service center or repair shop.
Tire Pressure Monitor, refer to page 145 .
Steering system
Steering system may not be working.
Have the system checked by a deal-
er's service center or another quali-
fied service center or repair shop.
Acoustic pedestrian protection inactive
Acoustic pedestrian protection de-
fective.
Have the system checked by a deal-
er's service center or another qualified serv-
ice center or repair shop.
Green lights
Turn signal
Turn signal switched on.
Unusually rapid flashing of the indi-
cator light indicates that a turn sig-
nal bulb has failed.
Turn signal, refer to page 109 .
Parking lights, headlight
Parking lights or headlights are
switched on.
Parking lights/low beams, headlight
control, refer to page 135 .
Front fog lights
Front fog lights are switched on.
Front fog lights, refer to page
138 .
High-beam Assistant
High-beam Assistant is switched on.
High beams are switched on and off
automatically depending on the traf-
fic situation.
High-beam Assistant, refer to page
137 .
Cruise control
The system is switched on. It main-
tains the speed that was set using
the control elements on the steering
wheel.
Blue lights
High beams
High beams are switched on.
High beams, refer to page
109 .
Seite 123
Displays CONTROLS
123
Online Edition for Part no. 01405A02680 - II/20