Mini CLUBMAN, Руководство пользователя

Страница: 266 / 324

Minimum tire inflation pressure is
reached
1. Unscrew the connection hose of the
compressor from the tire valve.
2. Pull the connector out of the power
socket in the vehicle interior.
3. Stow the tire repair set in the vehicle.
4. Immediately drive approx.
5 miles/10 km to ensure that the seal-
ing compound is evenly distributed in
the tire.
Do not exceed a speed of
50 mph/80 km/h.
If possible, do not drive at speeds less
than 12 mph/20 km/h.
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com-
pressor directly onto the tire valve stem.
3. Insert the connector into the power
socket in the vehicle interior.
4. Correct the tire inflation pressure to at
least 2.0 bar.
– Increase tire pressure: with the igni-
tion turned on or the engine run-
ning, turn on the compressor and let
it run for a maximum of 10 minutes.
– Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the
compressor from the tire valve.
6. Pull the connector out of the power
socket in the vehicle interior.
7. Stow the tire repair set in the vehicle.
Continuing the trip
Do not exceed the permissible maximum
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor, refer to
page 164 .
Reset the Tire Pressure Monitor, refer to
page 159 .
Replace the faulty tire and the sealant bottle
of the tire repair set promptly.
Tire chains
General information
The manufacturer of the vehicle has deter-
mined certain wheels and tires to be suita-
ble for operation on the vehicle.
Follow the tire chain manufacturer's in-
structions.
Do not initialize the flat tire monitor after
mounting tire chains, as doing so may result
in incorrect readings.
Do not reset the Tire Pressure Monitor after
mounting tire chains, as doing so may result
in incorrect readings.
When driving with tire chains, briefly acti-
vate Dynamic Traction Control, if needed.
Seite 266
MOBILITY Wheels and tires
266
Online Edition for Part no. 01405A541A8 - II/22