Mini CLUBMAN, Руководство пользователя

Страница: 105 / 324

Steptronic transmission
Switching off the engine
1. When the vehicle is stationary, apply
the parking brake.
2. Engage selector lever position P.
3. Press the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
Manual transmission
Switching off the engine
1. With the vehicle at a standstill, press
the Start/Stop button.
The engine is switched off.
The radio-ready state is switched on.
2. Shift into first gear or reverse.
3. Set the parking brake.
Auto Start/Stop function
Principle
The Auto Start/Stop function helps save
fuel. The system switches off the engine
during a stop, for instance in traffic jam or
at traffic lights. The ignition remains
switched on. The engine starts automati-
cally for driving off.
After each engine start using the Start/Stop
button, the Auto Start/Stop function is
ready and is activated at speeds faster than
about 3 mph/5 km/h.
Depending on the selected driving mode, re-
fer to page 182 , the system is automatically
activated or deactivated.
Engine stop
Functional requirements
The engine is switched off automatically
during a stop under the following condi-
tions:
Manual transmission:
– Neutral is engaged and the clutch pedal
is not pressed.
– The driver's seat belt is buckled or the
driver's door is closed.
Steptronic transmission:
– The selector lever is in selector lever po-
sition D.
– The brake pedal remains depressed
while the vehicle is at a standstill.
– The driver's seat belt is buckled or the
driver's door is closed.
In order to be able to release the brake
pedal at a vehicle standstill, engage the se-
lector lever in position P. The engine re-
mains off.
To continue driving depress the brake
pedal. When a gear is engaged, the engine
starts automatically.
The air flow from the air conditioning sys-
tem is reduced when the engine is switched
off.
Steptronic transmission: manual
engine stop
Depending on the vehicle equipment and
country version, the engine can be switched
off manually, if the engine was not switched
off automatically when the vehicle stopped:
– Depress the brake pedal forcefully again
from the current pedal position.
– Engage selector lever position P.
If all functional preconditions are fulfilled,
the engine switches off.
Seite 105
Driving CONTROLS
105
Online Edition for Part no. 01405A541A8 - II/22