Mini 2014 MINI, Руководство пользователя

Страница: 196 / 230

▷ With white lens: WY5W diadem
1. Push turn signal housing up and pull out at
the bottom.
2. Turn the bulb socket counterclockwise and
remove.
3. Replace the bulb.
4. Proceed in the reverse order to insert the
new bulb and install the turn signal hous‐
ing.
First hook the turn signal housing to the
bottom, then at the top press it into the
latch.
Changing wheels
Hints
The vehicle equipment does not include a
spare tire.
When using run-flat tires or tire sealants, a tire
does not need to be changed immediately in
the event of pressure loss due to a flat tire.
The tools for changing wheels are available as
accessories from your service center.
Jacking points for the vehicle jack
The jacking points for the vehicle jack are lo‐
cated at the positions shown.
Compact wheel
Hints
Safety measures in case of a breakdown
or a wheel change
▷ Park the vehicle as far away as possible
from passing traffic and on solid ground.
Switch on the hazard warning system.
▷ Set the parking brake, and engage first gear
or transmission position P.
▷ Have all vehicle occupants get out of the
vehicle and ensure that they remain out‐
side the immediate area in a safe place,
such as behind a guardrail.
▷ If necessary, set up a warning triangle or
portable hazard warning lamp at an appro‐
priate distance. Comply with all safety
guidelines and regulations.
▷ Perform wheel change only on a flat, solid
and slip-resistant surface. On soft or slip‐
pery ground, e.g., snow, ice, tiles, etc., the
vehicle or vehicle jack can slip away to the
side.
▷ Do not place wood blocks or similar items
under the vehicle jack; otherwise, it cannot
reach its carrying capacity because of the
restricted height.
▷ If the vehicle is raised, do not lie under the
vehicle and do not start the engine; other‐
wise, a mortal hazard exists.
◀
Seite 196
MOBILITY
Replacing components
196
Online Edition for Part no. 01 40 2 927 905 - II/14