Mini Gadgets MicroPlus, Руководство пользователя

Страница: 12 / 17

 The tablet will now scan for WiFi networks to join and display identified
networks on the right of the screen – if it cannot find any on the first scan
please move closer to your router and try again (turn WiFi off then on
again).
 Once a list of available networks is showing, tap the network you wish to
connect to.
 Tap the flashing curser under 'Password' to bring up the tablet's
keyboard.
 Enter your Network password / passphrase / network key, this may be
detailed on your router. Please take care when entering your Network
password as it may be case sensitive. You can check the 'Show
password' box to see what you are entering.
 Tap “Done” and then “Connect” - your tablet will show “Requesting IP
address” then “Connected”.
 You should now be connected to the internet and it will automatically
connect to your chosen network from now on.
Troubleshooting: WiFi problems
If the network shows as “secured” the WiFi network is password protected and
you will need to know the password to access the network.
If you do not know
your password and cannot find the password on the router please contact your
internet service provider for further assistance.
Most connection problems are due to incorrectly entered passwords, please do
double check you are entering the correct password and entering it in the
correct case
.
If your internet connection cuts out, check the screen timeout - when the screen
goes to sleep, the whole device sleeps and disconnects from the internet so
you would need to keep reconnecting.
 Go to “Settings”
 Under “Device” on the left hand side select “Display”
 On the right hand side select “Sleep” then select your chosen time.
Ten minutes is a good length of time to choose for the timeout because if you
have not used the device for ten minutes you will want it to conserve energy and
you can always manually put it to sleep by pressing the power button.