MINGDA TECHNOLOGY CO.,LTD
The parameters’ specific meaning.
Port:
click on this button can update the port number list, please use 250000
baud rates.
Connection
: connect to the printer.
Disconnect
:disconnect the printer.
Reset
:reset the printer internal parameters to initial state.
Real-time monitoring:
Can Monitor the extruder and heat bed temperature
in-time.
Open:
open the .G-code code files was generated by slicing software
Print:
After clicking on the print button. the machine will be entering the stage
of preheating, Pay attention: you dont' need to set the nozzle temperature
；
The
printing Software can read the temperature settings which into the .gcode
file. That's why if you want to change material. it must be regenerated the
gcode file.
Pause:
The machine won't stop the nozzle heating for a short period of time
pause, And please close the nozzle heating for a long time pause.
XY Speed:
Set XY axis movement speed manually
Z Speed
：
Set Z axis workbench movement speed manually
：
X axis back to zero, the corresponding is Y axis and Z axis back to zero.
：
XYZ axis all return to
zero.
+X
：
Along the X axis direction. Move the nozzle, the number represents the
size of the moving distance and when moving to the border please note don't
out. -, +, - Y, Y + Z, X, Z, and so on
，
Nozzle temperature, Set the nozzle temperature. it refers to the manual
preheating nozzle, the Set is Set, Off is closed, Here it is unable to control the
nozzle temperature when printing, only a pause or stop can control the
22
