MINGDA TECHNOLOGY CO.,LTD
Figure 2.3.4c Movement Interface
Adjust the X,Y,Z,E axis position accurately
3.5 Time Setting
Set the system time
3.6 Screensaver time setting
Set the screen saver start time
3.7 Storage Parameters
Stored in printer menu parameter changes done to the printer directly in
accordance with the next start-store run-off control scheme.
3.8 Language Setting
Switch Chinese/English
3.9 Version Information
Display the current version information
3.10 Export Mode
Expert mode in the machine factory has been set up, Not recommend novice
users to change
3.11 U disk mode
When the printer is connected to the computer via USB cable, install the
correct drivers, press select U disk mode to read the contents of the SD card.
10
