MINGDA TECHNOLOGY CO.,LTD
Click the next step:
Installing; Waiting until the installation is finished
Figure 3.1.2
There are two icons on the computer desk after the installation is
completed.
Cura
：
It’s our special software for our company’s 3D printer; Support the
exchange of the file of stl and obj ect
，
Changed it into the slicing file which is
recognized by the 3D printer
（
g-code
）
Pronterface.exe Controller
：
it’s the adjust software when you are printing. It
can help you to adjust the MINGDA 3D printer’s horizontal position and height
position. and other parameters. It also can help to adjust the slicing file(g-code)
directly which you made it well. Control MINGDA Directly and begin to the
process of printing.
2. The software operation.
2.1 The specific meaning of the parameters.
2.1.1 The basic interface set.
15
