21
Settings
Note:
When scrolling through the different menu screens, pressing the left center key enables
you to
return
to the previous screen. Should you need to
pause
a session while it is running,
press the center key. To resume the session, simply press the center key again. To
stop
a ses-
sion, press and hold the enter (center) key down for approximately two seconds. This will turn
off your iLightz unit.
Personal Preference Program:
All functions have built-in default values that are in effect un-
til you change them. Some functions, particularly VOLUME and INTENSITY, can be distinctly
personal and you may prefer some value other than the built-in value. To save you the incon-
venience of setting your preferred values each time the system is turned on, the PERSONAL
PREFERENCE PROGRAM is provided. PPP remains constant and will only change when you
adjust your personal preferences.
Variables stored under personal preferences include recently run programs, iPod volume,
iLightz volume, frequency, tone, phase, duty cycle, pitch, light intensity and choice of light-
frames (Common Power, RGB 10 or Color Matrix).
Backlight
is the length of time the iLightz menu display is illuminated.
Contrast
enables you to choose whether you prefer normal or highlighted text and the percent-
age of contrast that appeals to you.
About
lists the model number, firmware number and serial number of your iLightz unit.
Turbosonix
is a unique iLightz feature that enables users to synchronize the music of a Turbos-
onix CD with the pulsed lights and audio stimulation of an iLightz program. Not only will you
receive the full benefits of an iLightz session, but you will be able to experience the entertaining
sensation that Turbosonix CDs offer. While in the TurboSonix mode the only color available if
using the color matrix lightframes is white –meaning all colors are “on”. The user can have dif-
ferent colors only by using RGB 10 lightframes and manually setting their preferred color. This
only applies when in the “TurboSonix” mode.
“Personal Preferences” enables you to predetermine the val-
ues of sessions and remembers those values until you decide
to change them. This saves you time by not having to adjust
the values each time you experience a particular session.
The “Backlight” setting is for choosing how long you want
the menu screen display to be lighted. You can choose to have
the backlight always off, always on or lighted for 2, 5, 10 or
20 seconds each time you press a key on the pad. You can
always access this area to change the length of value.
“Contrast” enables you the choice of text format and per-
centage of contrast desired.
“About” is where you will find the model, firmware and se-
rial numbers of your iLightz system.
“Turbosonix” selection enables you to turn the feature on or
off.
