F3 Field Service Manual – Level 1 Maintenance
Page 21
3.4. Electronics Pack
3.4.1. Electronics Pack Removal:
•
Remove battery pack and sensitivity endcap.
Figure 22 Electronics Pack Removal, Exploded View
1
8007-0023 UPPER SHAFT BLACK F3
2
9511-0023 WIRING LOOM F3 SHAFT/HANDLE
3
COIL CABLE (part of 2021-0054 Coil F3)
4
8009-0007 RETAINER PLUG F3
5
COIL PLUG (part of 2021-0054 Coil F3)
6
3004-0001 ELECTRONICS PACK KIT SVC BLACK F3
7
4003-0078 SCREW M3X16 POSI SS
8
4309-0039 O-RING BULKHEAD 50MM
9
0703-0095 COVER BULKHEAD F3
10 4003-0084 SCREW NO 3X16 POSI SS
11 4003-0084 SCREW NO 3X16 POSI SS
12 4309-0044 GROMMET BULKHEAD F3
13 0703-0097 COVER RIBBON CABLE F3
Figure 23 Detector Parts List
•
This step only required if access to the split grommet is required: Undo and
remove the two screws (11) holding the ribbon cable cover (13) to the
bulkhead cover. Carefully pull back this cover and the split grommet (12)
along the main wiring loom cable.
•
Undo and remove the six screws (10) holding the bulkhead cover (9) to the
electronics pack rear panel. Pull and the bulkhead cover back along the main
wiring loom cable.