Minebea CSA-562B, Инструкция по эксплуатации

Страница: 12 / 34

2
4
CHECK switch
Output the check value.
5
FILTER setting switch
Set the cut
−
off frequency of low
−
pass filter.
6
Attenuator switch
Use for setting the sensitivity of analog output.
7
ZERO trimmer of the current output (Applied with the optional current output)
Trimmer of zero adjustment use for the current output.
8
SPAN trimmer of the current output (Applied with the optional current output)
Trimmer of span adjustment use for the current output.
9
GAIN switch of the current output (Applied with the optional current output)
Use for the set of sensitivity in current output.
10
Adjustment switch of the current output (Applied with the optional current output)
Use for change of condition in current output.
2
−
2. Rear panel
1
2
3
4
1
INPUT connector
Connect with stator.
2
OUTPUT connector
Connector for voltage output, current output, external input for check switch and alarm
output, and connect with the external equipment
3
Terminals for power supply
Terminals for AC power supply.
4
Connector for communication
Connector for the factory inspection.