Minebea CSA-507C, Инструкция по эксплуатации

Страница: 36 / 50

24
7 − 3 − 2. Connection with power supply and ground
Connection with power supply and ground should be made as follows
：
Beside, grounding should be the D class with single ground.
Power supply voltage AC200 V(AC180 V
〜
231 V)
Power supply frequency 50/60 Hz
Power consumption Approx.5 VA (without options at AC200 V)
〜
AC200 V
(AC180 V
〜
231 V)
D class single ground

Warning
●
Connection with power supply and ground should be made securely
as above figure, and also should be made within the specified
condition of power supply.
If neglected, it may cause an unexpected failure.

●
Grounding for the instrument should be the D class with single
ground. If neglected, it may cause an unexpected malfunction due to
the effects of noise from the other equipment.
●
GND terminal and the frame of the instrument is connected.