Minebea CSA-507C, Инструкция по эксплуатации

Страница: 14 / 50

2
3. Installation procedure
3 − 1. Installation place

●
Use the instrument where the temperature/humidity specifies within
the range as follows:
Environmental temperature
：−
10
℃ 〜
50
℃
Environmental humidity
：
Less than 85 %R.H.
(
Non condensing.
)
3 − 2. Location where installation is not allowed.

Warning
●
Do not locate the instrument on the places such as follows:
It may cause an unexpected faulty in the instrument.
D Do not expose the instrument in direct sunlight and/or high temperature area.
D Do not use the instrument in a high humid area.
D
Do not install the instrument where there is high mechanical vibration or shock.
D Do not use the instrument where there are excess of dusts and fine particles.
D Do not install the instrument where there include any corrosive gas or any salty
atmosphere.
D Do not install the instrument where there is rapid change of temperature and humidity.
D Do not install the instrument near the devices that are magnetized or generate an
electromagnetic field.
D Do not install the instrument where there may suffer radioactivity or radioactive rays.
D Avoid the location where chemical reaction may take place such as in a laboratory.