EN-8
Returning from cleaning mode
In the cleaning mode, press and hold the “CL” key and press the “/” key to return to the
normal mode.
When the keyboard returns from the cleaning mode, a beep sounds and texts fl ash for
indication.
When returning to the normal mode, the status of the electrostatic sensor is initialized.
Do not touch the key input surface during initialization.
Otherwise initialization will not be completed successfully and that may affect the input
sensitivity after returning.
During initialization, the following operations will be performed.
1.
The backlight fl ashes three times.
2.
A beep sounds while the backlight fl ashes for a few seconds and initializa-
tion starts.
3.
When initialization ends, the backlight goes off and the keyboard becomes
usable.
4.
Characters light up when the input area is touched.
Caution
To prevent input during cleaning, clean the keyboard in the cleaning mode or
after the cable is disconnected from the PC.
• The USB connector is not splash-proof. Be careful not to expose this part
to water.
Connecting a wet USB connector to the PC may cause a failure.
• Key input may not be recognized correctly when there are water droplets
on the keyboard surface. Wipe off any water droplets before using the key-
board.
Содержание Cool Leaf
