3.2
Internal lift-off protection with integrated jack-up
3.2.1
General instructions
No.
Description
1
Washer (2×)
2
Screw (2×)
3
Centering aid (2×)
4
Nut (2×)
5
Nut (2×)
6
Upper plate
7
Lower plate
The mounting kits are equipped with an internal lift-off protection, i.e. no additional
borings apart from the mounting holes in the vessel foot are required.
The figure shows the position for installation of the load cell.
3.2.2
Jack-up with centering guide
Note:
If the weighing object is fully displaced, the jack-up with the centering guide will be
restricted in terms of functionality.
Mounting kits PR 97/00, ../01
3 Recommendations for installation
EN-6
Minebea Intec
