manualshive.com logo in svg

Mine Site Technologies NS50, Руководство пользователя, Страница: 65 / 126

Поделиться
Скачать
Mine Site Technologies NS50 Скачать руководство пользователя страница 65

Recommended Settings

Description

Field

The recommended DTIM
interval is 1.

A DTIM is a countdown informing clients of the next
window for listening to broadcast and multicast
messages. Wireless clients detect the beacons and awaken

DTIM interval

on the DTIM interval to receive the broadcast and
multicast messages. Valid settings are between 1 and
255.

802.11d is not enabled by
default.

Wireless specification where configuration occurs at a
MAC layer level to comply with country or district rules.

802.11d enable

High.

Used to control the power delivered via the wireless
transmitter.

Transmit Power

Main.

Defines the antenna to be used for transmission of
wireless frames. The options are:

Transmit
Antenna

•

Main: The MAIN antenna will always be used for
transmission.

•

Aux: The AUX antenna will always be used for
transmission.

•

Diversity: The radio will determine the best antenna
to use for transmission based on the signal strength
of recently received frames from both antennas.

Main

: if a single antenna is

fitted.

Defines the antenna to be used for the reception of
wireless frames. The options are:

Receive Antenna

•

Main: The MAIN antenna will always be used for
reception.

Diversity

: if antennas

are fitted to both of the
radio's ports.

•

Aux: The AUX antenna will always be used for
reception.

•

Diversity: Both antennas will always be used for
reception and the received frame with the best signal
strength will be used.

Click on the Save Settings button to save advanced wireless settings.

Note:  Ensure that the physical connection of antennas is consistent with the transmit and receive
antenna settings. Failure to do so will give poor Wi-Fi performance and reduced tracking accuracy.

5.4.3 Defining VLANs

VLANs can be defined on the VLAN LIST screen as shown in 

Figure 28: VLAN list configuration screen

.

The VLAN LIST screen displays VLANs and the priorities that will be assigned to each VLAN.

NS50 User Manual

65

Revision A

Configuration Using the Web Interface

Содержание NS50































































































































Отзывы:

Нет отзывов