Mine Site Technologies NS50, Руководство пользователя, Страница: 61 / 126

Recommended Settings Description Field
Default is 15 seconds. The period that status reports will be sent from the
Access Point to the Tracker Engine. These status Status Reporting
Interval
reports are used by the Tracker Engine to
determine if the Access Point is up or down.
Advanced Settings
There is a single advanced setting called "Drop non-exciter tag reports". If the check box is enabled, the
Access Point will only send tag reports when the tag is in an AeroScout
®
Exciter field.
This setting applies to tag reports that are sent to AeroScout
®
Positioning Engines and MST Tracker
Engines.
5.3.6 Configuring Ethernet Switch Ports
The WAC in slot 1 (located on the left side of the NS50) is used for configuration and management of
the switch processors in the network switch. It enables the ports on the switch and the 48V rail for the
Power over Ethernet (PoE) supply to be configured, as shown in
Figure 25: Switch configuration screen .
Figure 25: Switch configuration screen
The Switch ports have the following configuration options:
Recommended Settings Description Field
Naming is specific to each device. Used to provide a convenient name for the port.
It is often used to name the device connected to
it. For example, "Level 68 camera". Name
On or Off. Enables or disables the port. Enabled
NS50 User Manual 61 Revision A
Configuration Using the Web Interface