MindWare Technologies 50-2303-01 Скачать руководство пользователя страница 25

Страница: 25 / 26

Customer Support:

Email: [email protected]

Phone: (614) 626-4888

US Toll Free: (888) 765-9735

Fax: (614) 626-4915

MindWare Technologies LTD.

1020F Taylor Station Rd.

Gahanna, OH 43230

Important Information

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference

that may cause undesired operation.

Any changes or modifications NOT explicitly APPROVED by MindWare Technologies could

cause the module to cease to comply with FCC rules part 15, and thus void the user’s

authority to operate the equipment.

IC COMPLIANCE

This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. this device must accept any interference, including interference that may

cause undesired operation of the device.

CONFORMITÉ AUX NORMES D’IC

Cet appareil est conforme à la(aux) norme(s) RSS sans licence d’Industry Canada.

Son utilisation est soumise aux deux conditions suivantes :

1. Cet appareil ne doit pas causer d’interférences et

2. il doit accepter toutes interférences reçues, y compris celles susceptibles

d’avoir des effets indésirables sur son fonctionnement.

Made in USA

0981

Содержание 50-2303-01


























Результаты поиска

Содержание 50-2303-01

Отзывы:

Похожие инструкции для 50-2303-01

Бренды по названию

Популярные бренды

MindWare Technologies 50-2303-01, Руководство по эксплуатации продукта

Результаты поиска

Содержание 50-2303-01

Отзывы:

Похожие инструкции для 50-2303-01

Бренды по названию

Популярные бренды