Mindray V60 Скачать руководство пользователя страница 13

Страница: 13 / 90

1-3

1.1.2 Cautions

CAUTION

Use only accessories specified in this manual.

At the end of its service life, the Anesthetic Vaporizer, as well as its accessories, must be

disposed of in compliance with the guidelines regulating the disposal of such products.

The Anesthetic Vaporizer may become unstable if the unit is tilted beyond 10 degrees.

Always install or carry the Anesthetic Vaporizer properly to avoid damage caused by

drop, impact, strong vibration or other mechanical force. Do not carry by the control

dial or the handle for locking lever.

1.1.3 Notes

NOTE

Keep this manual close to the Anesthetic Vaporizer so that it can be obtained

conveniently when needed.

This manual describes all features and options. Your Anesthetic Vaporizer may not

have all of them.

This product is latex free.

Содержание V60


























































































Результаты поиска

Содержание V60

Отзывы:

Похожие инструкции для V60

Бренды по названию

Популярные бренды

Mindray V60, Руководство оператора

Результаты поиска

Содержание V60

Отзывы:

Похожие инструкции для V60

Бренды по названию

Популярные бренды