Mindray Resona 7, Руководство оператора

Страница: 67 / 451

Exam Preparation 4-1
4
Exam Preparation
You can start a patient exam in the following situations:

New patient information: to start a new patient exam, patient information must first be entered.

New exam: to start a new exam for patient who is already registered, the recorded information can
be obtained through either iStation or Worklist.

Activate exam: to select an exam that has been completed within 24 hours, continue the exam with
imported patient information and exam data.

Continue an exam: to select an exam that has been paused within 24 hours, continue the exam with
imported patient information and exam data.
General procedure for an exam:
Enter the patient information

select an exam mode and probe

Choose an imaging mode

Start the
exam.

The system supports image scanning and measurement without patient information.
4.1 Patient Information
To start a new patient exam, it is better to type the detailed patient information.The system will set up a
unique information database for each patient based on the patient information entered, so that the
information of one patient will not be confused with that of another patient.
CAUTION:
Before examining a new patient, tap the [End Exam] key on the touch screen to
end the exam of the previous patient, update the patient ID and information, to
avoid mixing data of the next new patient.

To enter the "Patient Info" screen

Tap [Information] on the touch screen to enter the patient information page.

To exit the Patient Info screen

Exit and save the settings: tap [OK], or tap [Info] on the touch screen.

Exit without saving the information: click [Cancel] on patient information page or tap [Cancel] on
the touch screen.

Press <B> or <Freeze> to return to the current exam mode.

Click [Quick Register] on the screen to save the patient information quickly and return to the main
screen.

The system supports image scan and measurement without patient information.