Page 66 of 67
Place cup or ring electrodes on to the red EXG sensors TP and place a cup or ring electrode on
to the EXG ground TP.
Place cup or ring electrodes on to the black electrodes of the EXG sensor TP which is
connected to input A&B of the NeXus-10 and input 25&26 of the NeXus-32.
Determine electrode positions according to the 10-20 system by using measuring tape and
marking positions with a skin marker.
Rub the skin with a cotton swab and Nuprep at all electrode positions. Remove remaining
gel with a tissue. As an alternative to using Nuprep, alcohol pads are sometimes used.
Use the clip of the EXG TP cable to attach the EXG TP sensor to prevent pulling of the cables.
Apply some electrode paste (e.g. Ten20) to the electrodes by using for example a scoop.
