Mindeo MD6000, Руководство пользователя

Страница: 26 / 100

20
3-7 Scan mode & some global settings
Scan mode:
Good-read off-The trigger button must be pressed once to activate scanning. The light source of
scanner stops scanning when there is a successful reading or no code is decoded after the Stand-by
duration elapsed.
Momentary-The trigger button acts as a switch. Press button to activate scanning and release button
to stop scanning. The light source of scanner stops scanning when there is a successful reading or
no code is decoded after the Stand-by duration elapsed.
Alternate continue-The trigger button acts as a toggle switch. Press button to activate or stop
scanning.
Continue-The scanner always keeps scanning, and it does not matter when the trigger button is
pressed or duration is elapsed.
Timeout off-The trigger button must be pressed once to activate scanning. The light source of
scanner stops scanning when no code is successful decoded after the Stand-by duration elapsed.
Auto-detection- Good-read off – By setting Enable, the scanner will start operating if any nearby object
has been detected. The scanner will stop scanning when there is a successful reading or no code is
decoded after the Stand-by duration elapsed. Once the scanner stops scanning, the present object
must be removed to enable Auto-detection.
Auto-detection- Good-read on – By setting Enable, the scanner will start operating if any nearby object
has been detected. The scanner stops scanning when no code is successful decoded after the
Stand-by duration elapsed. Once the scanner stops scanning, the present object must be removed to
enable Auto-detection.
Working mode of Auto-detection:
In stand- The scanner must be placed in the stand to enable Auto-detection. When the scanner is not
in stand, the Scan mode will be Momentary. Note: This function is only valid when the Scan mode is
Auto-detection.
Always ON- Auto-detection is always enabled regardless of the placement of the scanner. Note: This
function is only valid when the Scan mode is Auto-detection.
Auto-detection sensitivity: It is the sensitivity of scanner to ambient brightness change. Sensitivity is
expressed as a percentage value of ambient light change, in the range of 5% to 50%. The smaller the
percentage value, the higher the sensitivity, the easier the scanner will be triggered.
Same barcode delay time for 1D symbols: This feature is activated only when the Scan mode is in
alternate or continuous mode. Once a 1D barcode has been scanned and output successfully, the optics
module’s lights must be off or moved away from the barcode beyond delay time to active a next
scanning on the same barcode.
Same barcode delay time for 2D symbols: This feature is activated only when the Scan mode is in
alternate or continuous mode. Once a 2D barcode has been scanned and output successfully, the optics
module’s lights must be off or moved away from the barcode beyond delay time to active a next
scanning on the same barcode.
Double confirm: If it is enabled, the scanner will require a several times of same-decoded-data to confirm