8
ASSEMBLY INSTRUCTIONS
4
4.
Use the M6 Dome Nut ( AA ) connect the female safety
guards ( A ) and male safety guard ( B ) to burner head
assembly ( C ).
5
A
B
AA
C
AA
x 1
M6 Dome Nut
Hardware Used
5-1. Open the door of tank housing body.
5-2. Attach the regulator (D) to the gas cylinder and
tighten with wrench if fitted with a nut, or tighten by
hand if fitted with a hand wheel.
5-3. Then leak test the gas inlet and gas cylinder
connections as explained on page 11.
5-4. Put the gas cylinder into the tank housing, then close
the door.
D
