
Ver 0.1 (6/21) PAGE 15 OF 30
©
Mimo Monitors
Network Setup
Find where the Myst Display and Link terminate in local IT closet using network tone and probe tool,
or other method. Remove connection from patch panel to network in both locations. Install new
cable those points and a PoE switch.
This PoE switch is ‘stand-alone’ and IS NOT connected to the
corporate IT or AV networks. Proceed with setup similar
to “Basic Concept” with the following
exceptions
-
Link Step 5: Configure the Link’s DIP switch to match the Myst’s DIP switch. The setting
matters, and must be unique for each pair that are sharing a PoE switch. Up to 16 units may
share a switch
- Myst Step 4:
The Myst does not require connecting a power adapter as power is supplied
over PoE from the switch. Be sure that the switch used is capable of powering 802.3af from
each port connected to the Myst display.