MIMAKI Tx400-1800D series, Руководство пользователя

Страница: 2 / 12

2
(1)
Head nozzle surface (Operation manual Chapter 4 “Maintenance of head nozzle surface”)
Leaving ink or dust on the head nozzle that has been attached during printing may cause discharge
error or capping error.
After working, be sure to perform maintenance of the head nozzle (NozzleClean2) to keep it clean.
Also clean the following three parts during the maintenance above.
 Bottom surface of the slider and around the head

Ink cap

Wiper
2. Daily care
 When possible, use the cleaning stick (SPC-0527) for cleaning around the head/ capping sta-
tion/ wiper.
Using the other cotton bud may attach lint, then it may damage the machine.
 Dust accumulates most around heads mostly, and it effects the operation and printing
results for this plotter, and also as this plotter has very delicate mechanism, need
enough attention to the care for it.
 When the wiper is deformed, replace with a new wiper according to the Operation
manual Chapter 4 “When the message of [Replace wiper] is displayed”.
Clean the bottom surface of the
slider and around the head with
a cleaning stick.
Ink cap Dirty wiper