© 2013 MIMAKI ENGINEERING CO.,LTD.
6.8.2
P.1
R.1.0
MAINTENANCE MANUAL > Disassembly and Reassembly > Heater relations > SSR
Model
SWJ-320S
Issued 2012.07.19 Revised
F/W ver
Remark
1.0
6.8.2 SSR
Work procedures
1. Turn off the main power supply and remove the power plug
from the main body.
2. Open the left electrical BOX cover.
3. Remove the SSR cover (a clear resin cover).
4. Disconnect all of the cables connected on the SSR.
5. Unscrew the SSR mounting screws, and remove the SSR.
6. Reverse the disassembly procedure for reassembly.
After turning off the sub and main power switches, unplug the power cord. Make sure to take 15
minutes before restarting the operation. It is very dangerous if sleep mode functions mistakenly
during the operation.
Additionally, if electric charges are still remaining, it may cause damage to electronic parts or the like.
SSR
PRT-SSR
Inside of electrical box
Pr-SSR
POST-SSR
screw(x5)
At connecting the cables, connect them correctly.