15
Caution / Point to be checked
Do not leave the ink slot empty
Do not leave the ink slot empty for a long time. Leaving it empty may dry the slot and solidify the ink in the machine,
then the machine will become unable to supply ink.
If ink cartridges are not set in the ink slot, an error message will display on the printer to set ink cartridges. Set the
same colored ink cartridge as the ink used before.
Checking ink in the ink case fixing base
Check periodically that ink is not accumulated in
the ink tray.
Ink can be seen in the tube shown in the figure on
the right if ink has accumulated. If ink is visible,
remove the tube from the clamp and drain the
accumulated ink in a cup or similar container.
To prevent the dryness of the male connector
Do not leave the 2L eco case removed from the base for a long time.
Dryness of the male connector may clog ink.
If the ink becomes clogged, use a cotton swab dabbed in the dedicated
cleaning solution to remove the solidified ink.
Even when ink is end, set an empty 2L ink pack to prevent dryness of the
male connector.
To prevent the dryness of the 2L ink pack connector part
When you removed the 2L ink pack from the seat before it ends, wipe ink
adhering to inside of the connector part of the 2L ink pack with a cotton
swab etc.
If ink adhering to inside of the connector part may dry out, it may cause ink
leakage when using it again.
Caution for setting 2L eco case
Setting the 2L eco case without 2L ink pack may result in air from the male connector being mixed in causing an ink
discharge fault.
Do not set the 2L eco case without 2L ink pack on the base.
The ink tray structure is such that ink will not
spill out even if the whole contents of a 2L ink
pack leaks out.
Ink
Tube
Clamp
Ink tray
