10
Replacing the 2L Ink Pack
When ink has run out, a message appears on the connected printer display.
(See the operation manual of the printer for details.)
Replace the 2L ink pack as follows.
1
Push the lever of the base down, and remove
the 2L eco case.
2
Remove the IC chip set on the middle
cartridge.
3
Open the 2L eco case, then replace the 2L ink pack.
• Keep the IC chip removed in the step 2 with used 2L ink packs.
(Not to mix with an IC chip of a new ink pack)
When exchanging 2L ink pack, be sure to wear goggles and gloves. Ink may spatter and get in
your eyes accidentally.
• Although approximately 10 cc of ink remains in the ink pack after use, the pack is filled so that the actual
amount used is two liters.
When replacing the 2L ink pack, replace the male
connector absorbent (attachment) periodically to
prevent the stain in the base.
• Replace the absorbent every five to
ten times of the 2L ink pack
replacement.
• When replacing the absorbent, be
sure to wear the attached goggles
and gloves.
Middle cartridge
IC chip
