MIMAKI JV5-130S, Руководство по эксплуатации

Страница: 90 / 292

3 Printing
3-20
Selecting and checking printing conditions
When the Type 1 to Type 4 printing conditions have already been registered, only selecting an appropriate
Type is required to switch between the settings to meet the desired printing.
How to select a user type
STEPS: (Setting by [FUNCTION] key)
1
Make sure that the printer is in LOCAL mode, and then select [SET UP] using the
[FUNCTION] key and press the [ENTER] key.
If it is in REMOTE mode, press the [REMOTE] key.
2
Select an appropriate one of Type 1 to Type 4 using [

] or [

], and press the
[ENTER] key.
STEPS: (Setting by [USER TYPE] key)
1
Make sure that the printer is in LOCAL mode, and then press the [USER TYPE] key.
The user type can be changed in the order of 2 → 3 → 4 → 2... by pressing the [USER TYPE] key. It can also
be changed using the [

] or [

] key.
Press the [ENTER] key to return to LOCAL mode.
How to check the user type
The user type currently used for printing can be identified by such an indication as [L.1] or [R.1] that is
displayed in LOCAL mode or REMOTE mode.

The number in the ( ) following Type represents the current type.
FUNCTION
SET UP
<ENT>
L.
∗
> [JV5-01]
width :
∗∗∗∗
mm
SET UP
SELECT
: TYPE 2
SET UP
SELECT
: TYPE 1
USER TYPE CHANGE
TYPE (1)
−>
<2> : ent
L.
∗
> [JV5-01]
width :
∗∗∗∗
mm
L. 1 > [JV5-01]
width :
∗∗∗∗
mm
R. 1 > [JV5-01]
∗∗.∗∗
m
[LOCAL mode] [REMOTE mode]