manualshive.com logo in svg

MIMAKI JV5-130S, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI JV5-130S Скачать руководство пользователя страница 3

CAUTION

DISCLAIMER OF WARRANTY

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE
WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MER-
CHANTABILITY OR FITNESS, AND MIMAKI NEITHER ASSUMES NOR
AUTHORIZES DEALER TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABIL-
ITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY IN
CONNECTION WITH ANY PRODUCT WITHOUT MIMAKI’S PRIOR WRITTEN CON-
SENT. IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR FOR LOSS OF PROFITS OF DEALER OR CUS-
TOMERS OF ANY PRODUCT.

Requests

This Operation manual has been carefully prepared for your easy understanding.
However, please do not hesitate to contact a distributor in your district or our office if
you have any inquiry.

Description contained in this Operation manual are subject to change without notice
for improvement.

It is also necessary to keep this Operation manual on hand.

In the case where this Operation manual should be illegible due to destruction or lost
by fire or breakage, purchase another copy of the Operation manual from our office.

Generally, names and designations referred to in this Operation manual are trade
marks or registered trade marks of the manufacturers or suppliers.

You can also download the latest manual from our website.

Reproduction of this manual is strictly prohibited. 

All Rights Reserved. Copyright © 2014 MIMAKI ENGINEERING Co., Ltd.

Содержание JV5-130S





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды