manualshive.com logo in svg

MIMAKI JV3-250 SP, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI JV3-250 SP Скачать руководство пользователя страница 7

- iii -

Standard drier fan

The fan provides cold air to reduce the drying time after printing and prevent color staining during the
media take-up process.

Indication of the INK Remains

Since the amount of ink that remains can be checked even during operation of the device, you can use
the ink and media without waste.

Simple display

The LCD panel displays the device setting menu in two lines (not one line), making it easier to see.

Since the LCD panel is provided with a backlight, the display can be clearly seen even in a dark
place.

The LCD panel can display six different languages for each, including English and Spanish.

Display plotting condition

It is possible to have the printing length displayed on the LCD panel and the plotting conditions to be

plotted for confirmation during operation of the device.

High-speed interface

The "IEEE-1394" interface allows for high-speed data reception from the computer.

Interlinked take-up system for extra-long plotting

The take-up system is interlinked with the plotter for continuous plotting up.

Safety bars at both ends of the media placement rack

Safety bars are provided at both ends of the media placement rack located behind the plotter to protect

the operator's hands from injuries during the media setting work.

Selectable head height

The head height can be set to 2 or 3 mm using the adjustment lever.

It can be set to 4 or 5 mm through modification by service personnel from Mimaki.
The head position can be changed to the best height to suit the media thickness.

Prevents lifts at both ends of media

The use of the curl stopper prevents lifts at both ends of diverse media and contact with the head.

Downloaded From ManualsPrinter.com Manuals

Содержание JV3-250 SP






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды