MIMAKI CF-0907, Инструкция по эксплуатации

Страница: 133 / 170

— 4 . 1 1 —
SETTING THE UNIT TO BE USED FOR INDICATION
[MODE SET] > [UNIT]
The unit to be used when indicating numerics on the LCD is specified.
Set values
mm: Numerics are indicated in millimeters.
inch: Numerics are indicated in inches.
1
Press the
PAGE
+
key several times
until the LCD indicates page 3 of the
LOCAL MENU.
2
Select the [MODE SET].
3
Press the
PAGE
+
key several times
until the LCD indicates page 5 of the
[MODE SET].
4
Select one of the following as a setting
for the [UNIT].
mm, inch
5
Enter the input values.
Press the
E N D
key to enter the input
values. If you do not enter the input
data, press the
C E
key.
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
[ LOCAL ] 3 / 4
INTERFACE ———>
MODE SET ———>
SELF TEST ———>
< MODE SET > 1 / 5
Z STROKE ∗ 7 mm >
MULTI–PASS ———>
VACUUM ∗ AutoOFF>
PAGE
+
F2
+
E N D
< MODE SET > 5 / 5
PEN ASIGN ———>
RESERVE
UNIT
∗ mm >
F3
+
< MODE SET > 5 / 5
PEN ASIGN ———>
RESERVE
UNIT
inch >
[ LOCAL ] 3 / 4
INTERFACE ———>
MODE SET ———>
SELF TEST ———>
PAGE
+