manualshive.com logo in svg

Milwaukee MW170 MAX, Инструкция по эксплуатации, Страница: 41 / 48

Поделиться
Скачать
Milwaukee MW170 MAX Скачать руководство пользователя страница 41

LOGGING 

41

Exported data file details:

 

y

The CSV file (comma separated values) may be opened with a text editor or 

spreadsheet application. 

 

y

The CSV file encoding is Western Europe (ISO-8859-1).

 

y

Field separator may be set as comma or semicolon. See Separator Type in SETUP 

OPTIONS section.

 

y

Interval log files are named ECLOT###, where ### is the lot number (e.g. ECLOT051).

 

y

Manual log file is named ECLOTMAN and stability log file is named ECLOTSTAB.

USB Export All

1.  With the meter on, insert a USB flash drive into the micro USB port located on top 

of the meter. If the flash drive does not have a micro USB connector, use an adapter.

2.  Press RCL then RANGE/

 to select the “EXPORT  ALL” option.

3.  Press GLP/ACCEPT to confirm. 

LCD displays "EXPORTING" and the percentage counter, followed by "DONE" when 

export is completed. Display returns to the lot selection screen. 

Note: The USB flash drive can be safely removed if the USB icon is not displayed. Do not 

remove the USB drive during export.

 

 

Overwriting existing data:

1.  When the LCD displays "OVR" with LOT### blinking (USB icon is displayed), an 

identical named lot exists on the USB.

2.  Press



 keys to select between YES, NO, YES ALL, NO ALL (ACCEPT tag blinking).

3.  Press GLP/ACCEPT to confirm. Not confirming exits the export. 

Display returns to lot selection screen.

Содержание MW170 MAX

















































Отзывы:

Нет отзывов