manualshive.com logo in svg

Milwaukee MW170 MAX, Инструкция по эксплуатации, Страница: 28 / 48

Поделиться
Скачать
Milwaukee MW170 MAX Скачать руководство пользователя страница 28

28

  MW170 Bench Meter

Messages Displayed During Measurement

 

y

If the EC measurement exceeds the specified limits or the temperature exceeds the 

– 20 to 120 °C (– 4.0 to 248.0 °F) range, “OUT OF SPEC” message is displayed on the 

third LCD line.

 

y

If the EC measurement exceeds the user-selected range, the “OVER RANGE” message 

is displayed on the third LCD line.

 

 

y

“NO CAL” message indicates that the probe needs to be calibrated or that the 

previous calibration has been deleted.

 

y

If the probe is not connected, “NO PROBE” message is displayed on the third LCD line.

 

Messages Displayed During Interval Logging

 

y

If EC temperature exceeds the specified limits, “OUT OF SPEC” message is displayed 

alternatively with the Log specific messages.

 

y

If the probe sensor is disconnected or damaged, logging stops and "NO PROBE" 

message is displayed on the third LCD line. The log file will indicate "Log end - Probe 

disconnected".

Содержание MW170 MAX

















































Отзывы:

Нет отзывов