Milwaukee MW170 MAX, Инструкция по эксплуатации, Страница: 39 / 48

LOGGING 39
7. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT or LOG/CLEAR).
“DELETE" and Log ### blinking is displayed, until the log is deleted.
After the log has been deleted “CLEAR DONE” message displays briefly.
Display shows logged data of the next log ###.
Note: Logs stored within an interval lot can not be deleted individually.
Log on Interval
1. Press RCL to access the logged data.
LCD displays “PLEASE WAIT” followed by “LOG RECALL” with ACCEPT tag blinking and
the total number of logs.
2. Press GLP/ACCEPT to confirm.
3. Use

keys to select an interval logging lot number.
The LOG ### LOT ### screen displays selected lot number (bottom right) and total
logs stored in lot (bottom left).
4. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT or LOG/CLEAR).
5. With the lot selected, press LOG/CLEAR to delete entire lot.
"CLEAR" is displayed with ACCEPT tag and lot name blinking.
Note: Use

keys to select a different lot number.
6. Press GLP/ACCEPT to confirm (to exit, press ESC or CAL/EDIT or LOG/CLEAR).
“PLEASE WAIT” with ACCEPT tag blinking is displayed, until the lot is deleted.
After the lot has been deleted “CLEAR DONE” message displays briefly.
Display shows the previous lot ###.