Milwaukee Mi 150, Инструкция по эксплуатации

Страница: 16 / 20

1 6 1 6
1 6 1 6 1 6
m V CALIBRATION (Mi 151)
Mi 1 Mi 151 Mi 151 Mi 151 Mi 151 51 has been accurately precalibrated for mV range at the factory. For optimum
accuracy, it is recommended to recalibrate the instrument for mV readings at least once a year.
Contact your dealer or Milwaukee Instruments Customer Service Center for more
information.
TEMPERATURE CALIBRATION
Mi 1 Mi 150
Mi 150
Mi 150
Mi 150
50 and Mi Mi 151
Mi 151
Mi 151
Mi 151
151 have been accurately precalibrated for temperature at the factory.
For optimum accuracy, it is recommended to recalibrate the instrument for temperature at least
once a year. Contact your dealer or Milwaukee Instruments Customer Service Center for more
information.
Instruction Manual Mi 150 & Mi 151 Bench Meters
*Not present in gel-filled electrodes
ELECTRODE CON DITION IN G & MAIN TEN AN CE
PREPARATIO N PRO CEDURE PREPARATIO N PRO CEDURE PREPARATIO N PRO CEDURE PREPARATIO N PRO CEDURE PREPARATIO N PRO CEDURE
Remove the electrode protective cap.
DO NOT BE ALARMED IF ANY SALT DEPOS-
ITS ARE PRESENT. This is normal with
electrodes and they will disappear when
rinsed with water.
During transport tiny bubbles of air may have
formed inside the glass bulb. The electrode
cannot function properly under these condi-
tions. These bubbles can be removed by
“shaking down” the electrode as you would
do with a glass thermometer.
If the bulb and/ or junction are dry, soak the
electrode in M 10016
M 10016
M 10016 M 10016
M 10016 cleaning solution for
at least ½ hour. For refillable electrodes, if
the refill solution (electrolyte) is more than
2½ cm (1”) below the fill hole, add the
appropriate electrolyte solution.