5
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
SYMBOLOGY
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
V
FUNCTIONAL DESCRIPTION
Cat. No.
M18 FAG125XPDB
ONE-KEY
™
indicator
1. Spindle lock
2. Handle
3. Vent clip
4.
5. Paddle switch
6. Side handle
7. Type 27 guard
11.
12. Speed selector dial
8. Accessory
9. Guard lock lever
10. Type 1 clip-on guard
SPECIFICATIONS
Cat. No. ...................................
Volts ............................................................ 18V DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Rated RPM .....................................................8 500
Recommended Ambient
Spindle Thread Size ........................................ M14
Max Capacity ........... 125 mm (5") x 6.35 mm (1/4")
Cat. No. ................................. M18 FAGV125XPDB
Operating Temperature .................... 0°F to 125°F
ASSEMBLY
Rated RPM.......................................... 3,500 - 8,500
Recharge only with the charger
-
WARNING
WARNING
changing or removing accessories.
Always remove battery pack before
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
To reduce the risk of injury when
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
grinding, always use properly in-
stalled guards. The guard type must match the
wheel type to provide maximum protection for
the operator if the wheel should break.
11
Cat. No.
M18 ONEFAG125XPDB
12
Cat. No.
M18 FAGV125XPDB
M18 FAG125XPDB,
M18 ONEFAG125XPDB
Volts
Direct Current
Rated Revolutions per Minute (RPM)
operations
Wear safety glasses
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Read Operator's Manual
ADDITIONAL BATTERY SAFETY RULES
WARNING
WARNING
To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater , certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a
short circuit.
Do not charge non-rechargeable
batteries.
1
6
5
4
3
2
9
8
10
7
Содержание M18 FAG125XPDB
Страница 11: ......
