2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings
and all instructions.
Failure to follow the warnings
serious injury.
Save all warnings and instructions for
future reference.
WORK AREA SAFETY
• To reduce the risk of injury, close supervision is
necessary
when an appliance is used near children.
• Store idle light out of reach of children.
Warm lights
can become hazardous in the hands of children.
• Do not use outdoors.
ELECTRICAL SAFETY
• Power cord
plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodi-
shock.
• Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges and refrig-
erators.
There is an increased risk of electric shock if
your body is earthed or grounded.
• To reduce the risk of electric shock, do not put light
in water or other liquid.
Do not place or store appliance
where it can fall or be pulled into a tub or sink.
• Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
• Arrange cords carefully to avoid hazardous environ-
ments.
Tripping or snagging on cords can cause injury
and product damage. Do not allow cords to run through
puddles or across wet ground.
• Do not unplug by pulling on the cord.
To unplug,
grasp the plug, not the cord.
• Unplug the cord from outlet when not in use and
before servicing or cleaning.
• Always use a suitable extension cord to reduce the
risk of electric shock.
•
PERSONAL SAFETY
• Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the light in
unexpected situations.
• Do not use on a ladder or unstable support.
Stable
footing on a solid surface enables better control of the
light in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge
manufacturer.
A charger that is suitable for one type
another battery pack.
•
packs.
Use of any other battery packs may create a
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
-
tacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is damaged or
of injury.
•
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging improp-
SERVICE
• Have
using only identical replacement parts.
This will
ensure that the safety of the light is maintained.
• Never service damaged battery packs.
Service of
battery packs should only be performed by the manu-
facturer or authorised service providers.
SPECIFIC SAFETY RULES
• Warning - The lens may get hot during use.
To reduce
the risk of burns, do not touch hot lens.
•
SAVE THESE INSTRUCTIONS
SYMBOLOGY
Volts
Direct Current
Alternating Current
Amps
Double Insulated
AC Power
1.
2.
Always extend legs before raising the
poles.
Keep hands clear of housing when
collapsing the extension poles.
Read operator’s manual.
If operating a light in a damp location is
unavoidable, use a residual current device
(RCD) protected supply.
Use of a RCD reduces
the risk of electric shock.
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or
temperature above 130°C (265°F) may cause
explosion.
Maintain labels and nameplates. These carry
important information.
If unreadable or missing,
contact a
MILWAUKEE
®
service facility for a
replacement.
Do not stare at the operating light
source.
Regulatory Compliance mark (RCM).
This product meets applicable
regulatory requirements.
Safety alert
V
A
