![background image](http://html1.mh-extra.com/html/milwaukee/m12-h/m12-h_original-instructions-manual_1798582011.webp)
8
English
GB
WARNING! Read all safety warnings and all instructions,
including those given in the accompanying brochure.
Failure
to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for
future reference.
SAFETY INSTRUCTIONS
Wear ear protectors.
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring.
Cutting accessory contacting a „live“ wire
may make exposed metal parts of the power tool „live“ and could
give the operator an electric shock.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
The dust produced when using this tool may be harmful to health. Do
not inhale the dust. Wear a suitable dust protection mask.
Sawdust and splinters must not be removed while the machine is
running.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors offer to retrieve old batteries
TECHNICAL DATA
Cordless Rotary Hammer
M12 H
Production code
4313 41 01...
... 000001-999999
Drilling capacity in concrete
13 mm
Drilling capacity in steel
8 mm
Drilling capacity in wood
10 mm
No-load speed
0 - 800 min
-1
Rate of percussion under load max.
0 - 5350 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009
0,9 J
Chuck neck diameter
43 mm
Torque max. (with battery Li-lon 1,5 Ah)*
32 Nm
Torque max.(with battery Li-lon 3,0 Ah)*
40 Nm
Battery voltage
12 V
Weight according EPTA-Procedure 01/2003 (Li-lon 1,5 Ah / Li-lon 3,0 Ah)
1,6 / 1,8 kg
Noise/Vibration Information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the
tool are:
Sound pressure level (K=3dB(A))
Sound power level (K=3dB(A))
81,5 dB (A)
92,5 dB (A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Hammer-drilling in concrete:
Uncertainty K=
6,7 m/s
2
1,5 m/s
2
* Measured according to Milwaukee norm N 877318
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Содержание M12 H
