background image

3

 cauTion

Set the rotary dial to an appropriate position before starting measurement.

Disconnect test leads from test points before changing rotary dial functions.

Never connect to a source of voltage with the dial function in OFF/Ω/ / / /

.

Firmly insert the test leads.

Do not expose the instrument to the sun, high temperature and humidity or dew fall.

Altitude 2000m or less. Appropriate operating temperature is within 14°F and 122°F (-10ºC 

and 50ºC).

Keep away from excess dust and water.

Be sure to power off the instrument after use. When the instrument will not be in use for a long 

period, place it in storage after removing the batteries.

Use a damp cloth or neutral detergent for cleaning the instrument. Do not use abrasives or 

solvents.

 Warning 

Install battery according to polarity (+ and –) diagrams.

Do not leave batteries within the reach of children.

Do not mix new and used batteries. Do not mix brands (or types within brands) of batteries. 

Properly dispose of used batteries.

Do not incinerate or dismantle batteries.

Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact 

accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. 

Liquid ejected from the battery may cause irritation or burns.

Accuracy is specified for 1 year after calibration, at 

operating temperatures of 14°F to 122°F (-10°C to 

50°C), with relative humidity less than 85%.

Maximum voltage between any terminal and 

earth ground

.... 600 V

Temperature

 .... 

Operating: 14°F to 122°F (-10°C to 50°C) 

    for Current measurements: 14°F to 104°F  

(-10°C to 40°C)

Storage: -40°F to 140°F (-40°C to 60°C)

Operating Altitude

.... 2,000 meters

IP Rating 

(Ingress Dust & Water Protection)

 .... IP64

Drop Test

 .... 1 Meter

Battery

 .... 2 AA, NEDA 15A, IEC LR6

Battery Life

 .... Approx. 26 hours with all lights on, 

240 hours without backlight. 

Fuse

 .... 600V AC/DC, 10A fast-acting 

(Milwaukee p/n 22-89-0300)

Safety Compliances

 .... EN61010-1, 

UL 61010-1, UL 61010-031 (Probes), 

EN61010-031 (Probes), 

IEC/EN 61010-1 2nd Edition for measurement 

Category III, 600 V, Pollution Degree 2, 

EMC EN61326-1

Certifications

 .... cULus,  CE, C1

C-Tick

general specificaTions

funcTional descripTion 

1. Display
2. Range button
3. Backlight button
4. VΩ Terminal input
5. COM Terminal input
6. A (Amps) Terminal input

4

2

1

3

6

7

8

7. Rotary dial
8. Min/Max button
9. Hold button
10.  Accessory bay

  (on back, not shown)

5

9

Содержание 2216-40









Отзывы: