Milnor MWT12E5, Установка и обслуживание

Страница: 72 / 121

PELLERIN MILNOR CORPORATION
6. Slowly open the door. Allow the door latch shaft, which is still captive within the door lock
mechanism, to slide out of the door. Watch to be sure the return spring separates from the
shaft cam and remains with the door, as shown in
Figure 5 .
Figure 5: Return Spring After Separation from Shaft Cam
1.2.
Removing the Door Latch Shaft from the Door Lock Mechanism
Tip: It is easier and more reliable to remove the shaft from the door lock mechanism then to attempt to
reinsert the shaft into the door and replace the handle while the shaft is still captive in the door
lock.
1. Remove the cover (not shown) from the door lock mechanism ( Figure 6 ).
2. Using a screwdriver, push down the door lock slider pin ( Figure 6 ) and rotate the shaft
( Figure 7 ) counterclockwise to remove it from the lock mechanism.
Figure 6: Door Lock Slider Pin in the Door Lock
Mechanism Figure 7: Removing the Shaft from the Lock
Mechanism
68