Milly Mally VIP, Руководство по эксплуатации

Страница: 10 / 30

EN
DEAR PARENTS!
Congratulations on your purchase of the VIP stroller manufactured the Milly Mally company.
You can be sure that your child’s rides in this stroller will be safe, comfortable and enjoyable.
Before using the stroller, please read this manual carefully and keep it for future reference.
Your child’s safety may be threatened if you do not
follow these instructions!
UNFOLDING THE STROLLER
A
Release the catch of the safety lock.
B
Unfold the stroller holding it in place with your foot on the brake cross-bar until the locks are
engaged. Before putting your child in the stroller make sure that the stroller has been unfolded
properly
FOLDING THE STROLLER
C
Detach front tray. Fold the hood. Put the backrest in the horizontal position. Unlock the front
swivel wheels.
D
Press the button of the folding lock under the stroller handle. Turn the handle in the direction
indicated by the arrow pressing the lock button.
E
Press the additional security lock on the rear tube and fold the stroller.
F
Having folded the stroller completely. secure it with a transport safeguard.
UNFOLDING AND FOLDING THE HOOD
G Unfold and fold the hood holding its front bow.
H In the VIP stroller the rear part of the hood can be detached by opening the zip connecting
the front and rear part of the hood.
MOUNTING AND DISMANTLING THE TRAY
I To fit front tray insert the plastic mounts of the tray in the lower lock slots on both sides of the
stroller until you hear a click. Make sure that the tray has been properly fitted.
J To dismantle the tray pull the tray locking device and detach it from the lock slot. Repeat the
same procedure on the other side of the tray.
DISMANTING THE WHEELS - FRONT WHEELS:
K
To detach the front wheels press the locking device sticking out at the bottom of the wheel set
and pull the wheel set until it slides off the tube. Repeat the same procedure on the other side.
DISMANTING THE WHEELS - REAR WHEELS:
L
Press the pin (indicated by the arrow) and pull the wheel set until it slides off the tube. Repeat
the same procedure on the other side.
MOUNTING THE WHEELS - FRONT WHEELS:
M
Put the wheel on the rear axle. Put a plastic lock on the protruding part of the axle. Cover the lock
with a cap pressing it until you hear a click. Make sure that the wheel is properly secured. Close
the whole set with a hub cap. Repeat this procedure on the other side.
MOUNTING THE WHEELS - REAR WHEELS:
N
Put the wheel on the rear axle. Put a plastic lock on the protruding part of the axle. Cover the
lock with a cap pressing it until you hear a click. Make sure that the wheel is properly secured.
Close the whole set with a hub cap. Repeat this procedure on the other side.
O Put the assembled rear wheel set on the tubes at the back of the stroller so that the brake
cross-bar is at the rear. Press the wheel set until it is engaged on the locking device pin. Make
7