Milltronics MD-36, Инструкция по эксплуатации

Страница: 9 / 15

spring
95/07/05
A
A .254mm(.010")
arresting bracket (by Milltronics)
shorten if required, refer to cross
section ‘B - B’
64 mm
(2.5")
5/16-18 UNC
set screw
( by customer )
FIG. 2
pulley
shaft
25 mm
(1")
DETAIL ‘A’
see DETAIL ’A’
16 mm (.630")
16.07 mm( .633" )
DIA.
angle iron
(by customer)
’B’
’B’
angle
iron
127 mm
(5")approx.
secure with
hook or bolt
anti rotation spring
CROSS SECTION ‘B-B’
arresting bracket
MD - 36 SERIES PULLEY MOUNTING
MD - 36
series
NOTE :
1. Machining on tail/bend pulley shaft per Detail ’A’ (by customer) to accommodate Milltronics speed sensor when
tail or bend pulley is not supplied by Milltronics.
2. Arresting bracket is an anti-rotation device only and must not secure or support the speed sensor. Bearing life would
be greatly reduced if speed sensor is not free to "float". Use anti-rotation spring to prevent mechanical oscillation of
speed sensor.
3. Grease mating surfaces to prevent seizing.
Floating