Milltronics MD-36, Инструкция по эксплуатации

Страница: 12 / 15

FIG. 4A
MD - 36 SS PARTS IDENTIFICATION
P/N MD-
G
4
3
2
1
Bearing Assembly Replacement
- turn supply power from integrator off
- remove speed sensor from mounting
- open cover and remove the 4 bearing assembly mounting screws #15 located externally around shaft
- pull out bearing assembly #5 c/w card, disc assembly and MD - 36 shroud
- remove screws #14, bushing #12 and card #13
- remove MD - 36 shroud screws #2 and MD - 36 shroud c/w terminal block #19 and card #13 attached
- loosen hex screw in shaft and remove extension shaft, disc hub and disc
- bearing assembly is now free
ITEM PART No. DESCRIPTION QTY.
1 54000050 Enclosure 1
2 32900200 Screw, 6 - 32 x 5/16 3
3 32950135 External Lockwasher, #6 5
4 22600005 Gasket, Bearing Assembly 1
5 A3250101 Bearing Assembly 1
6 21550016 MD-36 Shroud 1
7 20300075 Disc 36 Tooth 1
8 20300055 Disc Hub 1
9 25500060 Extension Shaft 1
10 32900560 Set Screw Socket, 8-32 x 3/16 2
11 32950130 External Lockwasher #4 3
12 20550025 Bushing 3
13 51016921 Speed Pickup Card Ver.3 1
ITEM PART No. DESCRIPTION QTY.
14 32900212 Binding Screw, Slot, 6 - 32 x 5/8 4
15 32900471 SS Screw, Socket, 10 - 32 x 1/2 4
16 32950096 Lockwasher, Split, #10 SS 4
17 32900085 Binding Screw, Slot, 4 - 40 x 3/8 3
18 32850030 Hex Nut, 6 - 32 2
19 26000130 Terminal Block 1
20 A1400087 Cable Connector 1
21 A0500009 Enclosure Arresting Bracket 1
22 32850120 Locknut T&B 1/2 in # 141 1
23 25700025 Spring Spnr. B-604 1
24 32800056 Bolt, Hex 5/16 - 18 x 3/4 SS 2
25 32950041 Washer, Flat 5/16 SS 2
26 32950106 Lockwasher, Split 5/16 SS 2
27 32850056 Nut, Hex 5/16 - 18 NC SS 2