Milltronics MD-36, Инструкция по эксплуатации

Страница: 11 / 15

FIG. 4
MD - 36/36A PARTS IDENTIFICATION
1
2
3
4
G
MD- P/N
Bearing Assembly Replacement
- turn supply power from integrator off
- remove speed sensor from mounting
- remove cover #11 and the 4 bearing assembly mounting screws #18 located externally around shaft
- pull out bearing assembly #5 c/w card, disc hub, disc and mounting brackets
- remove screws #17, bushing #15 and card #16
- remove speed sensor shroud screws #2
- loosen hex screw in shaft and remove extension shaft, disc hub and disc
- bearing assembly is now free
ITEM PART No. DESCRIPTION QTY.
16 51016921 Speed Pickup Card Ver.3 1
17 32900212 Binding Screw, Slot, 6 - 32 x 5/8 4
18 32900878 Cap Screw, Socket, 10 - 32 4
19 32950095 Lockwasher, Split #10 4
20 32900085 Binding Screw, Slot, 4 - 40 3
21 32850030 Hex Nut, 6 - 32 2
22 26000130 Terminal Block CSA 1
23 22600008 Gasket, Cover 1
24 24700015 Threaded Plug, 1/2 NPT 2
25 20500008 Enclosure Arresting Bracket 1
26 25700025 Spring Spnr. B-604 1
27 32800065 Bolt, Hex 5/16 - 18 x 1 1/4 2
28 32850055 Nut, Hex 5/16 - 18 2
29 32950040 Washer, Flat 5/16 2
30 32950105 Lockwasher Split 5/16 2
ITEM PART No. DESCRIPTION QTY.
1 54000923 Enclosure 1
2 32900200 Screw, 6-32 x 5/16 3
3 32950135 External Lockwasher #6 5
4 22600005 Gasket, Bearing Assembly 1
5 23250099 MD-36 Bearing Assembly 1
5A 23250147 MD-36A Bearing Assembly
6 21550016 MD-36 Shroud 1
7 20300075 Disc 36 Tooth 1
8 20300055 Disc Hub 1
9 32900480 Slot Round Head Screw 1/4" 4
10 32950100 Lockwasher Split 1/4" 4
11 45000061 Enclosure Cover 1
12 25500060 Extension Shaft 1
13 32900560 Set Screw Socket, 8-32 x 3/16 2
14 32950130 External Lockwasher #4 3
15 20550025 Bushing 2