manualshive.com logo in svg

Millipore Integritest Exacta, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Millipore Integritest Exacta Скачать руководство пользователя страница 74

Integritest

 Exacta Filter Integrity Test Instrument 

Operating and Maintenance Manual 

Managing User Access       

75

 

INTRODUCTION 

The user operations screen allows the system administrator to set user privileges and access 

levels for the instrument. Windows NT controls system security, and therefore, the usernames 

to which the privileges are assigned must be configured in the User Manager before they can 

be assigned privileges. See the section titled Setting Up User Accounts on page 63 for more 

information on this subject.  

Note:  

Users that are configured in Windows NT, but are NOT assigned privileges in the 

User Operations screens will default to Operator level access. Any personnel that will require 
more than Operator level access MUST be assigned an access level as detailed in this section. 

On the Main Menu Screen, click 

 to go to the User Access Screen (Figure 31). 

 

Figure 31: User Operations Screen 

Modify User Categories 

Go to the User Operations screen and click 

 to move to the User Access Levels screen 

(Figure 32).  

Содержание Integritest Exacta





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды