manualshive.com logo in svg

Millipore Integritest Exacta, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Millipore Integritest Exacta Скачать руководство пользователя страница 6

Integritest

 Exacta Filter Integrity Test Instrument 

Operating and Maintenance Manual 

TOPICS       

7

 

COPYRIGHT NOTICES 

Software for the Integritest Exacta Instrument 

Copyright ©1986

–

2001 

Millipore Corporation or an affiliated company 

All Rights Reserved. 

 

All or portions of the following software are licensed to Millipore for redistribution: 

Windows

®

 NT Embedded; Microsoft

®

 Visual 

C++ and Microsoft Visual Basic  

Copyright 

©

1981–1998 

Microsoft Corporation 

All Rights Reserved. 

OLectra™ 

Copyright 

©

1996–1997 

K L Group, Inc. 

All Rights Reserved. 

Crystal Reports™ for Windows 

Copyright 

©

1998 

Seagate Software, Inc. 

All Rights Reserved. 

Calendar Widgets™ 

Copyright 

©

1992-1997 

Sheridan Software Systems, Inc. 

All Rights Reserved. 

 

Trademark Notices 

Millipore, Integritest, Durapore, Pellicon, Millidisk, Millipak and Millex are registered trademarks of 
Millipore Corporation. 

Prep/Scale, Helicon, Solvex, Aerex, Aervent, Opticap, Prostak, HydroCorr and Optiseal are 
trademarks of Millipore Corporation or an affiliated company. 

Calendar Widgets is a trademark of Sheridan Software Systems, Inc.  
Centronics is a trademark of NationsBank of Texas or an affiliated company. 
Crystal Reports is a trademark of Seagate Software, Inc. 
HP is a trademark of Hewlett Packard Corporation. 
OLectra is a trademark of KL Group, Inc. 
Windows NT and Microsoft are trademarks of Microsoft Corporation. 
Pentium is a registered trademark of Intel Corporation. 
Setra is a registered trademark of Setra Systems Inc. 
Winzip is a registered trademark of NicoMak Computing Inc. 
PKUnzip is a registered trademark of PK Ware Inc. 
HEPA is a registered trademark of HEPA Corporation. 

 

Note: 

This Manual is intended as a reference for the Integritest Exacta instrument with 

version 3.0.X software. Different software revisions may or may not contain features and/or 
graphic representations that differ from the content in this manual. 

 

Содержание Integritest Exacta





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды