Quick start
6
Dispense pure water (E-POD)
It is a good practice to always recirculate water before dispensing.
To do this, press on the recirculation icon, this also refreshes the water quality parameters:
• Elix resistivity
• Temperature
There are several options to dispense pure water:
Manual Dispensing
To start dispensing at low flow, turn the
dispense wheel one notch counter-clockwise.
+
To start dispensing at full flow, press down on
the wheel.
Adjust flow rate
Stop
To increase the flow rate keep turning the
wheel counter-clockwise until full flow is
reached. To decrease the flow rate, turn the
wheel clockwise.
Low flow
High flow
_
+
To stop any ongoing dispensing, press down
on the wheel or rotate the wheel clockwise
until no more water flows from the dispenser.
