Miller Vi-Go, Руководство пользователя

Страница: 14 / 19

13
U s e r I n s t r u c t i o n s - E n g l i s h
5.6 Options for Terminating Cable in the Field
Thimble and Wire Rope
Cable Termination Kit (VGTWC)
Fast-Attach Fitting for 3/8” Diameter Approved Cable (VGF-1)
Dead End
1 Clip Base Width (1-1/8")
from Dead End
Live End
Options are available for terminating the cable in the field
for increased versatility during installation to accommodate
variable cable lengths.
These options are compatible
with 3/8” diameter approved cable only.
1. Feed cable around cable thimble, turning back 5-1/4" of cable from
thimble end.
Install first cable clip one clip base width (1-1/8") from
dead end of rope. Use torque wrench to tighten evenly, alternating
from one nut to the other until reaching a torque of 45 ft. lbs.
2. Install second cable clip as close to the thimble as possible. Again,
use torque wrench to tighten evenly to 45 ft. lbs.
Completely Assembled
*Wedge Set includes three toothed
wedges and retaining ring.
actoolsupply.com
actoolsupply.com