Miller Syncrowave 350 LX
, Руководство пользователя

Страница: 30 / 56

OM-356 Page 24
5-4. Current Control
1 Current Control
Use control to select front panel or
remote current control.
For front panel current control,
press button to toggle LED to Panel
position.
For remote current control, press
button to toggle LED to Remote 14
position (see Section 4-7).
NOTE: Lit LED indicates selected
mode.
When Output Selector switch (see
Section 5-2) position changes, LED
may change position, based upon
last selection.
1
1
(CE Nameplate Only)
5-5. Output Control
1 Output Control
Y
Weld output terminals are
energized when power is On,
and Output On LED is lit.
Use control to select front panel or
remote output control.
For weld output, press button to
toggle LED to On position.
For remote output control, press
button to toggle LED to Remote 14
position (see Section 4-7).
NOTE: Lit LED indicates selected
mode.
When Output Selector switch (see
Section 5-2) position changes, Out-
put control LED will always change
to Remote.
When Output On is selected, HF
and gas control are disabled.
1
1
(CE Nameplate Only)